Home Page Home Page
 Home | Software Development | System/Network Administration | Corporate Services | Resources | About Us
Monthly Server Management One-time Server Services Other Services
Network Administration Network Monitoring Network Security High Availability Load Balancing Data Backup and Recovery
Linux HOWTOs Linux Guides New RFCs Vulnerability list
Partners Careers Site Map
Modem-HOWTO Next Previous Contents


David S.Lawyer mailto:dave@lafn.org

v0.38, June 2005
Help with selecting, connecting, configuring, trouble-shooting, and understanding analog modems for a PC.

1. Introduction

2. Modems for a Linux PC

3. Modem Pools, RAS

4. Serial Port and Modem Basics

5. Configuring Overview

6. Locating the Serial Port: IO address, IRQs

7. Configuring the Serial Driver (high-level) "stty"

8. Modem Configuration (excluding serial port)

9. Serial Port Devices /dev/ttyS4, (or /dev/ttys/4) etc.

10. Interesting Programs You Should Know About

11. Trying Out Your Modem (Dialing Out)

12. Dial-In

13. Uugetty for Dial-In (from the old Serial-HOWTO)

14. What Speed Should I Use with My Modem?

15. Communications Programs And Utilities

16. Two Modems (Modem Doubling)

17. ISDN "Modems"

18. Troubleshooting

19. Flash Upgrades

20. Other Sources of Information

21. Appendix A: How Analog Modems Work (technical) (unfinished)

22. Appendix B: Analog Voice Infeasible Over Non-Voice Modem

23. Appendix C: "baud" vs. "bps"

24. Appendix D: Terminal Server Connection

25. Appendix E: Cable and DSL modems

26. Appendix F: Connecting 2 Modems Directly Back-to-Back (Leased Lines).

27. Appendix G: Fax pixels (dots)

28. Appendix H: Stty Hanging Problem (prior to 2000)

29. Appendix G: Antique Modems

Next Previous Contents